Neptune-white-final
PSA Holsters

Custom Kydex PSA Dagger Holsters

The Dagger gets sold as a Glock 19 you can afford, and enough of that is true that people buy a Glock holster with it. Then the retention feels wrong and nobody can explain why. The answer is the trigger guard: PSA drew it differently, and a trigger guard is not a detail on a Kydex shell — it is the thing doing the holding.

So we press Dagger patterns rather than adapting Glock ones. And the badge covers three unrelated pistols besides, which is the other half of getting a PSA order right.

Build Your PSA Holster
See Supported PSA Models
Slim Carry by TWAW custom Kydex IWB holster by Neptune Concealment

4

PSA patterns
Dagger, Dagger Compact, Dagger Micro X and the Rock 5.7 — four pistols with very little in common.

No

Glock 19 shells do not fit
The trigger guard geometry differs, and that is precisely where our retention comes from.

4.15 in

Micro X barrel
Longer than the standard Micro Dagger at 3.41, which catches people out when they order by name.

5.7x28

The Rock
A different cartridge on a different frame with a 23-round magazine. It shares nothing with a Dagger.

Fitment

Which PSA Are You Carrying?

Three of these four wear the Dagger name and they are not one gun in three sizes. The full-size and Compact follow Glock proportions closely enough to be confusing without being interchangeable; the Micro X is PSA’s own design and runs a longer barrel than the plain Micro Dagger it is named after.

Find the exact marking on your slide below, because on this brand the family name genuinely will not narrow it down.

Dagger — Full Size & Compact

The guns the brand is known for. Glock-adjacent proportions, PSA’s own trigger guard, and the reason a borrowed Glock shell disappoints people.

  • PSA Dagger
  • PSA Dagger Compact

Micro — PSA's Own Design

Where the Dagger line stops following anyone else. Slimmer, lighter, cut for a Shield RMSc footprint, and longer in the barrel than the name suggests.

  • PSA Dagger Micro X — 4.15 in barrel, 7.2 in overall, 17.7 oz

Rock — 5.7x28mm

A different cartridge entirely, on a full-size frame with a railed dust cover and a 23-round magazine. Related to the Daggers by badge only.

  • PSA Rock 5.7 — 4.7 in barrel, 8.1 in overall

Carrying a PSA we have not listed, or a Dagger with a threaded barrel or an aftermarket slide? Tell us what you have. This platform gets modified more than most, so we would rather see it than assume the factory dimensions still apply.

Read the marking on your slide?

That plus your carry position is all we need. On this brand the exact model matters more than usual.

Configure Your PSA Holster
Carry Style

Carrying a PSA

These are guns bought to be used rather than admired, and most of them end up carried hard. These four cover where they land.

Dagger Appendix IWB

The Compact and the Micro X both suit it. A proper Dagger-cut shell is what makes the retention feel right rather than approximate.
Shop IWB

Dagger Strong-Side OWB

Easy and forgiving, and the sensible home for the full-size Dagger or the Rock 5.7.
Shop OWB

Dagger Sidecar

Gun and spare on one platform. Suits a pistol whose whole appeal is not having to be precious about it.
Shop Sidecar

PSA Mag Carriers

The Rock takes a 23-round 5.7 magazine that is nothing like a Dagger stick, so the pouch is pressed to match.
Shop Mag Pouches
Lights & Optics

Rails, Optic Cuts and Aftermarket Slides

PSA ships most of these optic-ready, which is a large part of the appeal at the price. The Micro X uses a Shield RMSc footprint; the larger guns and the Rock carry a conventional rail beneath the dust cover, so the usual bodies mount without drama:

Plum carbon fiber Chronos Series OWB paddle holster by Neptune Concealment

Red dots. Tell us the sight and, where one is used, the plate. The Micro X’s RMSc cut takes a specific class of sight directly, and cutting the channel to that exact housing keeps the top of the shell in contact with the slide rather than hovering above it.

This platform also gets aftermarket slides more than most, so if yours is not the one PSA shipped, say so before we press anything.

Ask About a PSA Build
Recommended Builds

Three Builds for a PSA

Nothing here is priced to punish you for buying a value pistol. Pick by how you carry rather than by what the gun cost.

Tan carbon fiber Triton 2.0 Kydex IWB holster with twin belt clips and a claw

Triton 2.0 Inside Waistband IWB Holster

$60

The everyday answer for a Dagger Compact or a Micro X, with retention and ride height both adjustable once you have worn it a while.

Build the Triton 2.0
Black carbon fiber Nestor Series Kydex holster with a tan backer and bronze eyelets

Nestor Series OWB or IWB

$75

Convertible between inside and outside the belt, which suits a pistol that is likely to be your range gun and your carry gun at once.

Build the Nestor
Black carbon fiber Kydex single magazine pouch for outside-the-waistband carry

Single Mag Pouch OWB

$30

Pressed for the magazine you actually carry — a Dagger stick and a 23-round 5.7 magazine need entirely different pouches.

Add a Mag Pouch
Why Neptune

Why "Fits Glock 19" Is Not Good Enough Here

Plenty of listings will tell you a Dagger drops into Glock 19 Kydex. Sometimes the pistol goes in; that is not the same as being held. What a dedicated pattern changes:

  • Retention taken from a trigger guard we actually measured, rather than from a Glock trigger guard the Dagger only resembles.
  • Clearance for PSA's slide cuts built into the mold, so the shell is not riding on an edge that Glock never had.
  • Separate bucks for the Micro X and the Rock, which are not Dagger variants in any sense a holster would recognise.

Pressed by hand to order in Middle Tennessee by a veteran-owned shop. For the opposite case — a Glock-pattern pistol where most Glock shells genuinely do work — see the Ruger RXM page, or return to holsters by firearm brand.

Slim Carry by TWAW custom Kydex IWB holster by Neptune Concealment
FAQ

PSA Dagger Holster Questions

Not reliably, and the failure is specific rather than general. The Dagger Compact sits very close to a Glock 19 on overall dimensions, which is why the assumption is so common, but PSA drew the trigger guard differently and added its own slide cuts. A hard-sided Glock 19 shell that takes its retention from an indent at the trigger guard is exactly the kind that will not index properly on a Dagger. Order the Dagger pattern and the retention point is where it should be.
No, and the names make that harder than it needs to be. The standard Micro Dagger runs a 3.41 inch barrel; the Micro X-1 runs 4.15 inches at 7.2 inches overall, 1.1 inches wide and 17.7 ounces, with a Shield RMSc optic cut. That is three quarters of an inch of difference at the muzzle, which is the end of the shell that closes. Check the marking rather than ordering on the word "micro".
It does not. The Rock is chambered in 5.7x28mm on its own full-size frame — 4.7 inches of barrel, 8.1 inches overall, around 25 ounces, and a 23-round magazine. It carries Glock-pattern sights and a Picatinny rail, which is where the family resemblance ends. Nothing about its proportions matches a Dagger, so we hold it as a separate pattern and press it accordingly.
Yes. The full-size Dagger, the Compact and the Rock all carry a rail under the dust cover, so the usual bodies fit — a Streamlight TLR-7 or TLR-7A for carry, a TLR-1 HL or a SureFire X300U if it is living on a belt. On the smaller frames the compact Olight units are a better balance. Whichever you run, name it at checkout, because the shell is formed around the pistol and the light as one shape.
Usually, but we need to see it first. This platform gets modified more than almost anything else we press for, and an aftermarket slide can change the length, the cuts and the optic height all at once. Send a photo of the assembled pistol next to a ruler, along with the make of the slide and the sight you are running, and we will tell you honestly whether an existing pattern covers it or whether it needs its own.
Yes, across all four patterns and at the same price as right-handed. Left-hand shells come off a genuinely mirrored mold rather than a right-hand shell with the clip moved across, which matters on a pistol where the retention point is already the thing that generic shells get wrong. Pick Left under Hand at checkout and the buck is flipped, not the hardware.
Most Dagger builds land between $60 and $75 — the Triton 2.0 at $60 inside the waistband, the convertible Nestor at $75 — with a magazine pouch from $25. Everything is cut once the order arrives, on a ten to fourteen business day bench window. If the pistol has been modified, tell us at checkout rather than afterwards; that is what keeps the build inside the window.

Build Your PSA Holster

Give us the exact model, the hand and anything mounted on it. The shell is cut to a Dagger, not to a Glock that a Dagger resembles.

Configure Your PSA Holster
Ask About a Modified Dagger
Shopping Cart