Neptune-white-final
Springfield Armory Holsters

Custom Kydex Springfield Armory Holsters

Springfield does something no other manufacturer we build for does: it puts the measurement in the name. Ten of our fifteen Springfield lines carry a barrel length, and some of those lines sit less than an inch apart.

That is genuinely helpful, right up until nobody reads it. Check the number stamped on your slide before you order, because on this catalogue a fraction of an inch is the whole difference between a shell that holds and one that rattles.

Build Your Springfield Holster
Find Your Springfield
Olive carbon fiber Kydex OWB paddle holster

15

Springfield fitments
Spread over four platforms that have almost nothing mechanical in common.

10

Named by the inch
Two thirds of the range tells you its barrel length before you even open the case.

0.7 in

Hellcat to Hellcat Pro
The gap between the two best-selling guns here, and easily enough to break a fit.

3

XD-M lengths
The same pistol offered at three barrel measurements, each pressed on its own mold.

Fitment

The Number on the Slide Is the Answer

Work through the four platforms below and find the line that matches your slide marking exactly. Where a measurement appears in the name, treat it as part of the name rather than a detail you can round off.

The XD family is where this bites hardest. A Mod.2 at four inches and a Mod.2 at five inches are the same pistol in every respect a spec sheet cares about, and two entirely different objects once Kydex has to close around the muzzle.

Hellcat Family — Micro Carry

The guns that put Springfield back at the front of the concealment market. Two lines that share a name and a look, and differ by enough in both directions that a shell built for one leaves the other unsupported.

Echelon — The Newest Platform

Springfield’s current flagship duty pistol, built on a chassis of its own and sold in two sizes. The optic arrangement is the standout feature and it changes how the sight channel gets cut.

  • Echelon Full Size
  • Echelon Compact

XD, XD-M and XD-S — Named by the Inch

The deepest part of the range and the part that rewards reading carefully. Ten lines, most separated only by barrel length, spanning three decades of revisions and two generations of the Mod designation.

  • XD
  • XD Mod.2 — 4 in barrel
  • XD Mod.2 — 5 in barrel
  • XD Mod.3 — 4 in barrel
  • XD-E
  • XD-M — 3.8 in barrel
  • XD-M — 4.5 in barrel
  • XD-M — 5.25 in barrel
  • XD-S — 3.3 in barrel
  • XD-S Mod.2 — 3.3 in, .45 compatible

Prodigy — The 2011

The double-stack 1911 pattern, and the heaviest thing Springfield asks anyone to carry. A wide grip on a long slide, which puts it in a different carry conversation from everything above.

  • Prodigy — 5 in barrel

Deep dive: the Hellcat holster page separates the Hellcat from the Hellcat Pro properly, with the measurements side by side.

Slide marking worn off, or running a barrel Springfield did not fit at the factory? Measure from the breech face to the muzzle and send us the figure — that single number resolves nearly every case.

Read the number off your slide?

Match it to the line above, add your hand, optic and light, and that measurement is what the mold gets built around.

Configure Your Springfield Build
Carry Style

Springfield Holsters by Carry Style

This range runs from a pocketable micro to a double-stack 1911, so there is no single right answer. Match the mounting to the mass.

Springfield IWB Holsters

Inside the waistband, which is where the Hellcat and XD-S were designed to disappear and where most of this range spends its day.
Shop IWB

Springfield OWB Holsters

Outside the waistband for the Prodigy, the long XD-M slides and anything you are wearing openly at a range.
Shop OWB

Springfield Sidecar Holsters

Pistol and reload on a single platform, which is how a lot of Hellcat owners solve an eleven-round magazine.
Shop Sidecar

Springfield Bundles

Order the holster and its matching carrier together and both get pressed in the same run.
Shop Bundles
Light & Optic Ready

Optics Are Standard Here, Lights Depend on the Frame

Springfield went optics-ready earlier and more thoroughly than most, and the OSP designation now runs through the Hellcat, the Echelon and much of the XD-M range. Our shells for those lines are cut with a channel that clears a shielded micro dot.

Lights are the more variable question, because this catalogue spans guns with a full accessory rail and guns with barely any dust cover at all. A Prodigy or a five-inch XD-M will take a full-size TLR-1 or an X300U; a Hellcat wants a compact body such as the TLR-7 Sub, and the pocket-sized end of the range often takes nothing at all.

Olive carbon fiber Kydex OWB paddle holster seen from the muzzle end

Say the optic and the irons separately. A dot sitting in a milled slide cut is one clearance; suppressor-height front sights standing proud of it are another, and they need the channel opened further. Both are free to specify and neither can be added after the shell is pressed.

Pictured: an OD green carbon fiber paddle holster, muzzle end.

Add an Optic Cut or Light
Popular Builds

Springfield-Ready Holsters

Three builds that cover the width of this range. Each presses to any Springfield line above once you give us the model and the measurement.

Tan carbon fiber Triton 2.0 Kydex IWB holster with twin belt clips and a claw

Triton 2.0 Inside Waistband IWB Holster

$60

Twin clips spread the load across more belt than a single point can, which keeps a Hellcat sitting flat instead of tipping.

Build the Triton 2.0
Chronos 2 dual layer Kydex OWB paddle holster by Neptune Concealment

Chronos 2 Dual Layer OWB Paddle Holster

$75

A layered paddle with the surface area to carry a Prodigy or a long XD-M without the belt sagging under it.

Build the Chronos 2
Gemini Series dual layer Kydex IWB holster with a soft backing layer

Gemini Series Dual Layer IWB Holster

$70

Two bonded layers give a thin micro pistol a more rigid mouth, so the shell stays open for a one-handed reholster.

Build the Gemini
Why Neptune

Why Fractions of an Inch Get Their Own Mold

A catalogue maker rounds this range down to about four shells and lets tension screws absorb the rest. That is precisely the wrong instinct on a brand whose lines differ by half an inch at the muzzle. What we do instead:

  • Each barrel length in the XD and XD-M ranges is pressed on its own buck, so a longer slide is never asked to sit in a shell that stops short of it.
  • The two Hellcat lines are held completely apart, because the taller grip and longer slide of the Pro change both ends of the shell at once.
  • Optic channels are cut against the actual sight height on the gun rather than to a generic clearance that suits an average dot.

Hand-formed to order in Middle Tennessee by a veteran-owned shop, with nothing pulled from a shelf. About us · every brand we press for.

White and grey Theseus 2.0 Kydex holster with an attached magazine carrier
FAQ

Springfield Armory Holster Questions

They are not, and it is the most frequent mix-up on this brand. The Pro is longer in the slide and taller in the grip, so it runs past the end of a standard Hellcat shell and finishes with the muzzle unsupported. Retention on a micro pistol is taken over a very small area to begin with, and losing the front of it is not something a tension screw can compensate for. The two have separate lines in our selector; pick the one printed on your slide.
Read the slide. Springfield stamps the model and, on most of the range, the barrel length, and that measurement is the part people skip. An XD Mod.2 comes in four and five inch versions that are otherwise identical, and the XD-M is offered at 3.8, 4.5 and 5.25 inches. If the marking has worn away, measure from the breech face to the muzzle and send us the number — that alone identifies the line.
Both sizes, held as separate patterns. The Echelon is Springfield’s newest duty platform and it is offered in a full-size and a compact, which differ enough through the slide that they cannot share a shell. Its optic mounting is also worth mentioning when you order, since the way the dot sits down in the slide affects how much clearance the sight channel needs.
They share a barrel length but not a pattern, and our selector lists them separately for that reason. The Mod.2 line carries a note in the selector that it is .45 compatible, which tells you the frame and slide were revised rather than merely refreshed. If you are unsure which generation you have, the grip texture and the trigger guard shape are the quickest tells, or send us a side-on photo and we will identify it.
Yes, but choose a compact body. The dust cover on a micro pistol is short, so a full-size light overhangs the muzzle and undoes the concealment the gun was bought for. The Streamlight TLR-7 Sub is the usual answer at this size, with the TLR-6 as a clamp-on alternative. Whichever you pick, name the exact model at checkout, because the light is pressed into the shell as part of the shape rather than accommodated around it.
We press for the five inch Prodigy, and it deserves a word of warning about weight rather than fit. A double-stack 1911 is the heaviest pistol in this range by a clear margin, and carrying one inside the waistband asks a great deal of a belt. Most owners run it outside the waistband on a paddle or a wide-loop mount, where the load spreads out instead of hanging off a single clip.
The pistol shell, no. Magazines extend below the grip and never touch the surfaces the Kydex grips, so a Hellcat holster works the same with an eleven or a thirteen round body in it. The magazine carrier is a different story, since a moulded pouch only fits the body it was pressed for and Springfield’s flush and extended magazines measure differently. Tell us which one you actually carry as a spare.
The Triton 2.0 inside-the-waistband build is $60, the Gemini dual layer is $70 and the Chronos 2 paddle is $75, with a weapon light adding $20. Everything is cut once your order lands, so allow 10 to 14 business days. If you own a Springfield variant we have not tooled before, the first one needs a mold built and tested and will run past that window — we will tell you upfront rather than after you have paid.

Give Us the Model and the Measurement

Springfield already did half the work by printing the number on your slide. Read it to us, add your optic and light, and we will press the shell around it.

Start Your Springfield Build
Ask Which Line You Have
Shopping Cart