Glock 17 Holsters

Custom Kydex Glock 17 Holsters

Most 17s are not spending their lives under an untucked shirt. They ride on duty belts, in range bags and beside beds, which means the interesting decision on this pistol is rarely concealment — it is how the holster attaches and how hard it holds.

We press the Gen 4 and Gen 5 as separate patterns and build them into everything from a single-clip inside-the-waistband shell to a Level 2 duty rig on a quick-detach mount.

Grey Titan Convertible Kydex holster and magazine pouch set with bronze hardware

4.49 in

Barrel
Long enough that a shell cut for a compact leaves the last half inch hanging in open air.

Level 2

Retention available
An active lock you release deliberately, which a duty belt genuinely needs and a pocket gun does not.

QLS / RTI

Quick-detach mounts
Move one shell between a belt, a drop leg and a chest rig without unthreading anything.

17+1

Capacity
The reason the pistol still sells thirty years on, and the reason the mag carrier matters here too.

Pick Your Generation

Which Glock 17 Do You Own?

Two lines in our selector cover this pistol. Below is which one to choose, including the two cases where the answer is to talk to us before you order rather than guess.

Your Glock 17What to knowOrder this
Gen 3Finger grooves, single-side slide stop. The slide and trigger guard the shell grips are unchanged into the Gen 4.Glock 17 Gen 4
Gen 4Revised backstraps and an enlarged magazine catch, neither of which the Kydex touches.Glock 17 Gen 4
Gen 5Grooves removed, magwell flared, slide stop on both sides and a reshaped frame nose.Glock 17 Gen 5
Gen 6Not yet a line in our configurator for this pistol, though the Glock 19 Gen 6 is tooled.Message us before ordering
Gen 17L or a ported slideLong-slide and ported guns sit outside the standard patterns entirely.Message us before ordering

Quick tell between the two we stock: run a thumb down the front of the grip. Ridges mean Gen 3 or Gen 4, smooth means Gen 5. Ask us if your pistol is a police trade-in and the markings are worn off.

Cross-Fit

What Shares a Glock 17 Shell?

The full-size Glock family splits by chambering more than by shape, so several pistols drop straight into a 17 pattern while a couple of near-identical-looking ones do not.

FirearmShares this shell?What to order
Glock 22 (.40 S&W)YesBuilt on the same full-size frame and slide envelope. Choose the Glock 22 line so the generation is right.
Glock 31 (.357 SIG)YesIdentical outside dimensions to the 17. There is no separate line for it, so select the 17 and mention it in your order.
Glock 47Ask usAlso a full-size slide, but we hold it on its own tooling. Tell us and we will point you at the right line.
Glock 34NoThe competition slide runs longer again and needs the extra length cut into the shell.
Glock 19X or Glock 45NoThese pair a full-size frame with a shorter slide, and the shell indexes on the slide. A 17 pattern swallows them.
Glock 19NoShorter slide again, so it sits deep and the retention point never comes together.

If you own several full-size Glocks in different calibres, one shell will usually cover them. Order for the 17 and tell us which others you want it to hold, and we will confirm before pressing.

Know your generation?

Set it alongside your mount, light and hand, and the shell gets cut around that specific combination.

Carry Style

Mounting a Full-Size Glock

Ask what a 17 is for before asking where it goes. Duty, range and home guns each want a different attachment.

Glock 17 OWB

The default for a full-size. Sits above the belt, draws cleanly and does not fight you when seated.

Glock 17 Duty Rigs

Active Level 2 retention with a release you operate on purpose, built for open carry on a belt.

Glock 17 IWB

Concealable with the right wedge and a decent belt, though the grip is the part that gives you away.

Glock 17 Mag Carriers

Seventeen-round magazines are long and heavy enough that a moulded carrier beats a pouch.
Lights & Optics

Full-Size Rail, Full-Size Light

Tan Veritas Series Kydex OWB holster shell molded for a weapon light

A 17 will carry any light in our catalogue without complaint. That is not true of most pistols we build for, and it changes the calculation — with a full-size rail and a long dust cover you can pick the light you actually want rather than the one that happens to fit.

Optics. The sight channel on our full-size shells clears a slide-mounted dot, and on a 17 there is enough slide length that even a large window optic sits well inside the holster mouth. Suppressor-height irons are the one thing to declare when you order, because a taller front post wants a deeper channel cut.

Pictured is a tan Veritas outside-the-waistband shell, formed around a pistol and light together.

Recommended Builds

Three Ways to Carry a Glock 17

Each is available for both generations. Choose your model, mount, light and hand on the product page.

Zeus Level 2 OWB Duty Holster

$130

Active retention with a deliberate release. This is the one to buy if the pistol is worn openly and somebody could reach it before you do.

Ares Series OWB Carry

$125

Level 2 again, on Tegris straps that ride closer to the body than a moulded paddle. Our pick when a duty rig also has to be worn all day.

Veritas Series OWB — QLS / RTI

$75

One shell, several mounting points. Snap it between a belt hanger, a drop leg or a plate carrier without ever removing the holster from the gun.

Compare

Glock 17 or Glock 19?

The oldest argument in the Glock world, and for holster purposes it comes down to two thirds of an inch of slide and half an inch of grip.

Glock 17Glock 19
Capacity, flush magazine17+115+1
Barrel length4.49 in4.02 in
Overall length7.95 in7.28 in
Grip height5.47 in5.04 in
Weight, unloadedAbout 25 ozAbout 24 oz
Generations we toolGen 4, Gen 5Gen 4, Gen 5, Gen 6

The slide is not what gives a 17 away — the grip is. That extra half inch of frame is what prints under a shirt, which is why the 19 wins for concealment despite the two being much closer in size than people assume. Carrying concealed most days? Look at the Glock 19. Wearing it openly, shooting it often, or keeping it by the bed? The 17 is the better gun and this is the better page.

Why Neptune

Duty Gear Fails Differently

A concealment holster that loosens is an annoyance. A duty holster that loosens is a problem, because the pistol is visible and the failure modes are worse. What we build differently for full-size carry:

Veteran-owned, built by hand in Middle Tennessee. Who we are, or browse the full Glock range.

Blue carbon fiber Ares Series Level 2 OWB holster on Tegris belt straps
FAQ

Glock 17 Holster Questions

Plenty of people do, and the slide is not the obstacle — it disappears down your leg line. The grip is what prints, because it sits above the belt and pushes a cover garment out at the exact point people look. A wedge under the muzzle, a claw pulling the butt inward, and a belt rigid enough to carry the weight will get you most of the way there. If you are fighting it daily, the shorter grip of a 19 solves it properly.
It will. The 22 is the same full-size pistol chambered in .40 S&W, with matching frame and slide dimensions, so the shell shape is identical. The 31 in .357 SIG is the same story. Choose the Glock 22 line if you own one so we match your generation, and select the 17 with a note if you carry the 31, which has no separate entry.
Not as a standing line yet. Our configurator tools the Gen 4 and Gen 5 for this pistol, and while the Glock 19 Gen 6 does have its own pattern, the 17 Gen 6 does not. Get in touch before ordering and we will tell you where it stands — new patterns are a mould rather than a production run for us, so it is a conversation worth having.
Level 2 means the pistol is held by an active mechanism you release deliberately, on top of the passive grip the moulded shell already provides. If you carry openly — duty, security, uniformed work — it is worth having, because a visible pistol is one somebody else can reach for. For concealed carry under a shirt it is usually unnecessary complication, and passive retention off the trigger guard is enough.
They are quick-detach interfaces that sit between the holster and whatever it is attached to. Fit the receiver to a belt hanger, a drop leg and a plate carrier, then move a single moulded shell between all three in a second or two without unthreading a belt or re-adjusting the ride. Our Veritas Series is built around them, and they suit a 17 more than most because full-size guns get worn in more configurations.
A full-size rail means the choice is genuinely open, which is unusual. The X300U-A and X300U-B are the duty default for good reason; the Streamlight TLR-1 HL-X gives more output for the money; the Modlite PL350 throws further than either if you want reach. All are pressed into the shell as part of the shape, so pick the light first and tell us at the time of order rather than adding one later.
Outside the waistband, for most owners of this pistol. A full-size gun inside your belt takes up real estate you notice when you sit, drive or bend, and the draw is slower because the grip is buried. Outside carry with a decent cover garment is faster and far more comfortable, and it is how the vast majority of our 17 shells go out. Inside carry works, but it is the harder road on this size of pistol.
The Veritas OWB on a QLS or RTI mount is $75, the Ares Series Level 2 is $125 and the Zeus Level 2 duty rig is $130. Simple inside-the-waistband shells for the same pistol start at $50. All are cut and pressed to order on a ten to fourteen business day window, since a duty rig in your generation with your light is not something that sits pre-made on a shelf. Where a fresh mold is required, that estimate no longer applies — molds are built, fitted and proven first.

Build Your Glock 17 Holster

Generation, mount, retention level, light, hand. Specify them and a rig gets built around that exact combination.

Shopping Cart