Neptune-white-final
Walther Holsters

Custom Kydex Walther Holsters

Every other brand on this site asks one question: which gun do you own. Walther adds a second, because it is the only manufacturer we press for that builds a separate pistol around a different-sized hand.

The PDP F-Series is not a colour option or a shorter barrel. It has its own grip circumference, its own trigger reach and its own lines in our selector — so across these 8 configurations, the F matters as much as the number.

Build Your Walther Holster
Find Your Walther
Tan Kydex Proteus Series inside-the-waistband holster with a belt clip

4

PDP lines
Two barrel lengths in standard form and two more in F-Series, all tooled separately.

2.56 in

F-Series trigger reach
Shortened deliberately, along with the grip, for shooters with smaller hands.

20%

Less force to rack
What Walther engineered into the F-Series slide, which is a genuine design change.

8

Walther fitments
From a duty pistol down to a .22 that gets carried far more than people admit.

Fitment

The Number and the Letter Both Count

On the PDP side of the catalogue two things vary independently. The barrel length is the obvious one, running 3.5, 4 and 5 inches. The frame is the one people forget, because a standard PDP and an F-Series PDP of the same barrel length are not the same pistol.

Get both right and the rest of this range is straightforward. The smaller guns below are each their own design and share nothing with the PDP.

PDP — Four Lines, Two Variables

Walther’s current duty and carry platform, and the part of the range where barrel length and frame size have to be answered separately rather than as one question.

CCP and PPS — Slim Carry

The dedicated concealment guns, both single-stack and both narrow enough that a shell has very little width to work with. Neither borrows anything from the PDP range.

  • CCP
  • PPS Gen 2

PK380 and P22 — Small Bore

The rimfire and the .380, and easily the most underestimated corner of this catalogue. The P22 in particular gets carried and holstered far more often than its calibre suggests.

  • PK380
  • P22

Deep dive: the Walther PDP holster page lays the four lines out as a grid, so you can find yours by length and frame together.

Not sure whether yours is an F-Series? The grip circumference and the reach to the trigger are the tells, and the box will say so. Send us a photo if it is not obvious and we will confirm before anything is cut.

Got the length and the frame?

Those two answers are the whole brief on a PDP. Add your hand and any light and the shell is formed around that combination.

Configure Your Walther Build
Carry Style

Walther Holsters by Carry Style

A five-inch PDP and a PPS Gen 2 are opposite ends of a very short catalogue, and they want completely different mounting.

Walther IWB Holsters

Inside the waistband, which the CCP and PPS were designed around and which a 3.5 in F-Series handles comfortably.
Shop IWB

Walther OWB Holsters

Outside the waistband for the five-inch PDP and for range days, where a full-size duty gun has nothing to gain from hiding.
Shop OWB

Walther Sidecar Holsters

Pistol and reload on one chassis, which is a sensible pairing for a PDP carried as a primary.
Shop Sidecar

Walther Bundles

Holster and carrier ordered as a set and formed together, so the colour and hardware genuinely match.
Shop Bundles
Light & Optic Ready

The PDP Takes Anything, the Small Guns Take Almost Nothing

The PDP range carries a full accessory rail on a duty-size frame, which puts effectively the whole list in play — a Streamlight TLR-1 or TLR-7, a SureFire X300U, an Olight PL-2 Pro or a Modlite PL350 all sit properly on one. That applies to the F-Series too; the frame is smaller but the rail is still there.

The CCP, PPS Gen 2, PK380 and P22 are the other story. These are slim or small-frame designs with little or no rail to work with, so a light is often not an option at all. Ask before you buy one rather than after.

OD green carbon fiber Theseus 2.0 Kydex IWB holster with red hardware and a mounting wing

Optic cuts. The PDP went optics-ready early and most of them you will meet are cut for a micro dot. Where yours is, we take the sight channel deep enough for a shielded housing to clear it completely, and that does not change which of the four PDP lines you order. Taller irons fitted to co-witness want that channel deeper again — mention them separately.

Pictured: an OD green carbon fiber shell with red hardware and a mounting wing.

Ask What Your Walther Takes
Popular Builds

Walther-Ready Holsters

Three builds spanning this catalogue. Say which line you own at checkout, along with your hand and clip.

Tan Kydex Triton Series IWB holster by Neptune Concealment

Triton Series IWB Holster

$50

The plain starting point, and a sensible match for a PPS or a CCP where there is little width to play with.

Build the Triton
Proteus Series custom Kydex IWB holster by Neptune Concealment

Proteus Series IWB Holster

$60

Rides lower in the waistband, which suits a full-size PDP grip that would otherwise sit proud under a shirt.

Build the Proteus
Teal carbon fiber Theseus Series dual colour Kydex holster with green hardware

Theseus Series Dual Color Holster

$85

Two-tone and switchable between belt positions, which earns its place on a duty pistol that also gets carried off shift.

Build the Theseus
Why Neptune

A Frame Built for a Smaller Hand Is Still a Different Frame

It would be easy to treat the F-Series as a standard PDP with a slimmer grip and press one shell for both. Walther changed the grip circumference and the slide, and both of those are surfaces a holster touches. Three consequences:

  • The F-Series lines are held apart from the standard PDP rather than folded in, because a reduced grip circumference changes where the shell meets the frame at the rear.
  • Barrel length and frame are treated as two separate questions on this brand, so a four-inch standard and a four-inch F never share a buck.
  • On the small-bore guns we will tell you plainly when a light cannot be mounted, rather than selling a light-bearing shell for a pistol with nowhere to put one.

Each shell made individually by a veteran-owned shop in Middle Tennessee, about two working weeks from order. Meet the shop · all the brands we press for.

Black carbon fiber Gemini Series Kydex holster with magazine carrier
FAQ

Walther Holster Questions

We list and press them separately, and we would rather you ordered the one that names your pistol. Walther designed the F-Series around a smaller hand, giving it a reduced grip circumference, a 2.56 inch trigger reach and a slide engineered to need about twenty per cent less force to rack. Those are real design changes rather than cosmetic ones, and the grip in particular is a surface the shell contacts. Order the F line if that is what you own, and tell us if you are unsure.
The box and the model marking will say so, and in the hand the grip is noticeably slimmer in circumference with a shorter reach to the trigger face. It is not a subtle difference for anyone who has held both. If you bought the pistol second-hand without a box and are not certain, send us a photograph of the grip from the rear and we will identify it before we cut anything.
No. The five-inch slide runs a full inch further forward, so it will not enter a shell formed around the four-inch gun. Going the other way, a four-inch pistol dropped into a five-inch shell finishes well short of the closed end with its muzzle unsupported and the retention points sitting past where they should be. Both are separate lines here. Read the barrel length off the slide and order that one.
We do, as its own line. The P22 is a rimfire pistol and gets dismissed as a plinker, but a great many of them are carried, and it has a shape that shares nothing with the PDP or the concealment guns. It takes its own pattern accordingly. If yours wears a threaded barrel or an aftermarket sight, mention that when you order, because both change where the shell has to finish.
Usually not, and it is better to hear that before you buy the light. Both are slim single-stack designs built for concealment rather than for hanging accessories off, so there is little or no rail to mount to. That is a property of the pistols rather than a limit on our shells. If a weapon light is important to you, any PDP in the range carries a proper rail and will take a full-size unit comfortably.
Most of the PDPs you are likely to own are cut for a micro red dot, and where yours is we take the sight channel deep enough that a shielded optic housing clears it entirely. Doing so does not move you onto a different line. The one thing worth flagging separately is taller iron sights fitted to co-witness through the optic window, since those stand above the housing and the cut has to be carried further to clear them.
Magazines are a question for Walther rather than for us, and worth checking against their own documentation. Holsters we handle straightforwardly: the F-Series has its own lines in our selector and gets its own press, because the changes Walther made to the grip and the slide land where a shell makes contact. Rather than reasoning from what might interchange, tell us which pistol you actually own and we will form the shell around that one.
The Triton Series IWB starts at $50, the deeper-riding Proteus is $60 and the two-tone Theseus is $85, with a weapon light adding $20 where the pistol has a rail to take one. Allow 10 to 14 business days, as each shell is formed once your order arrives. All eight Walther lines are tooled already, so nothing waits on a mold being built first.

Give Us the Length and the Frame

On a PDP those are two separate answers, and the F-Series is a different pistol rather than a different finish. Tell us both.

Start Your Walther Build
Ask Which Line You Have
Shopping Cart