Heckler & Koch Holsters

Custom Kydex Heckler & Koch Holsters

H&K is the deepest catalogue we press for — 18 configurations — and the one where a simple question gets different answers depending on the model. Ask whether you can bolt a light to it and the honest reply is: which one do you have?

The USP uses a mounting rail of H&K’s own design rather than the industry standard, so a normal light needs an adapter first. That adapter sits under the dust cover, which is precisely where the shell closes.

OD green carbon fiber Hermes Series Kydex OWB holster with belt loops

18

H&K fitments
More than any other manufacturer in our selector, across four separate generations of design.

USP

Proprietary rail
H&K’s own mounting standard, which a normal light cannot attach to unaided.

P2000

Where that changed
Built as an updated USP Compact and given an industry-standard rail instead.

6

VP9 family lines
Including the SK, the L and two variants whose names do not announce their size.

Fitment

The Rail Question Comes Before the Light Question

Most brands make this simple: there is a rail, standard lights fit it, done. H&K split the difference across its own history. The USP family carries a proprietary rail with its own geometry, and mounting a conventional light to one means fitting a dedicated adapter underneath first.

An adapter is not an accessory as far as Kydex is concerned. It changes the outline of the dust cover, so the shell has to be formed with it in place. Tell us if you are running one.

VP9 Family — The Striker Range

H&K’s modern striker guns, and the part of the catalogue built to current standards throughout. Six lines here, separated mostly by slide length, with a couple of names that give no clue which size they are.

USP and HK45 — The Proprietary Rail

The classic hammer-fired range, and the reason this page starts with rails. These carry H&K’s own mounting standard, so a conventional light needs an adapter fitted before it will attach at all.

P30 and P2000 — Standard Rail

The generation that moved to an industry-standard rail, the P2000 having been built as an updated USP Compact. Lights bolt straight on here with nothing in between.

CC9 — Slim Carry

H&K’s slim single-stack concealment pistol, and the narrowest thing in this range. It shares its outline with nothing else on the page.

Deep dive: the H&K VP9 holster page works through the six VP9 lines, where four different slide lengths hide behind one name.

Running a USP with a light adapter fitted, or a variant not in the list below? Tell us what is bolted under the dust cover and we will form the shell around it rather than around the bare pistol.

Know your model and your rail?

Those two together settle it. Add your hand, optic and light and the shell is formed around exactly that.

Carry Style

H&K Holsters by Carry Style

This catalogue runs from a slim single-stack up to a full-size .45, and the mounting should follow the mass rather than the badge.

H&K IWB Holsters

Inside the waistband, which suits the CC9, the VP9SK and the P30SK and asks a good deal of a belt on anything larger.

H&K OWB Holsters

Outside the waistband for the USP, the HK45 and the long-slide guns, where the weight belongs on the belt.

H&K Sidecar Holsters

Pistol and reload across one chassis, which balances a heavy hammer-fired gun rather than hanging it off a point.

H&K Bundles

Holster and carrier ordered together and formed in the same run, so a duty setup matches throughout.
Light & Optic Ready

Two Rail Standards Under One Badge

Here is the split in plain terms. The P30, P2000 and the VP9 range carry an industry-standard rail, so a Streamlight TLR-1, a SureFire X300U or an Olight PL-2 Pro bolts straight on and the shell is formed around gun and light together, as normal.

The USP family does not. H&K designed its own rail geometry for those pistols, and a conventional light will not attach without a dedicated adapter underneath. That is worth knowing before you buy the light rather than after.

Black carbon fiber Hermes Series light-bearing Kydex holster with a green accent

If you run a USP adapter, it is part of the pistol. The adapter bolts beneath the dust cover and changes the profile the Kydex closes around, so a shell formed for a bare USP will not seat one that is wearing it. Say so at the order stage. On the optic side, where a slide is milled for a micro dot we carry the sight channel deep enough to clear a shielded housing, and tall irons want it deeper still.

Pictured: a black carbon fiber light-bearing Hermes Series shell.

Popular Builds

H&K-Ready Holsters

Three builds sized for this range. Name the model and whether an adapter is fitted when you order.

Hermes Series OWB Holster

$60

A belt shell with the room to take a USP or an HK45 and the light hardware bolted beneath it.

Nestor Series OWB or IWB

$75

Moves between belt positions on one shell, which suits a P30 doing duty during the week and carry at the weekend.

Titan Convertible IWB / OWB + Mag

$135

Converts between inside and outside the waistband and brings a matching carrier, which suits the deepest catalogue we hold.

Why Neptune

An Adapter Is Not an Accessory

The industry habit with a USP is to form the shell around the bare pistol and leave the dust cover area open, on the grounds that whatever is bolted there will fit through the gap. That works until retention has to come from the area you left open. What we do instead:

Hand-formed to order at a veteran-owned bench in Middle Tennessee, roughly two working weeks. More about the shop · the full brand list.

Coyote carbon fiber Hermes Series OWB holster, open view
FAQ

Heckler & Koch Holster Questions

Not directly. The USP family uses a mounting rail of H&K’s own design rather than the industry standard one, so a conventional light has no way to attach to it as it comes. Fitting a dedicated adapter under the dust cover is the usual route, and there are several made for exactly this. What matters for us is that the adapter changes the shape of the pistol where the shell closes, so tell us it is fitted and we will form the holster around gun and adapter together.
No, and that is the point of it. H&K designed the P2000 as an updated USP Compact and replaced the proprietary rail with an industry-standard one, so a normal weapon light bolts straight on with nothing in between. The same is true of the P30 and the VP9 range. If a light matters to you and you are still choosing between models, that difference is worth more attention than most spec-sheet comparisons.
No. The Compact runs a shorter slide and a shorter grip than the full-size USP, so it stops well inside a shell formed around the larger gun and the retention surfaces never line up properly. Our selector lists the USP, the USP Compact and the USP45 Full as separate lines, alongside the HK45 pair. Order the marking on your slide rather than the family name, and mention any rail adapter at the same time.
Size, and enough of it that they take separate patterns. The SK is the sub-compact, shorter in both the slide and the grip, while the P30L runs a longer slide than the standard P30. All three are their own lines here. The whole P30 range uses a standard rail, so light choice is not the complicating factor it is on the USP side — pick your size and the mounting question answers itself.
Six lines within the VP9 family, which makes it the largest single range in our H&K catalogue. The VP9SK is the sub-compact and the VP9L is the long slide, so those two names tell you what you need. The VP9A1F and VP9CC are the ones that do not announce their size, and the VP40 is the .40 calibre sibling. If your slide marking does not make the variant obvious, send us a photo and we will identify it before pressing.
Both, plus the HK45C USP line, all as separate patterns. These are full-size and compact .45s with real weight to them, which for most owners points toward outside-the-waistband carry where the belt can take the load rather than the waistband. As with the rest of the older range, check what rail your particular pistol carries and tell us whether anything is mounted beneath the dust cover.
Much of the current range is, particularly across the VP9 family, and where your slide is milled for a micro red dot we take the sight channel deep enough that a shielded housing passes through without contact. That does not change which line you order. The older hammer-fired guns are more variable, so if you have had a slide milled aftermarket, tell us what optic is going on and we will cut for that specific housing rather than a generic one.
The Hermes OWB starts at $60, the convertible Nestor is $75 and the Titan set with a matching carrier is $135, with a weapon light adding $20 where the pistol can take one. Turnaround runs 10 to 14 business days since every shell is formed after the order arrives. All 18 H&K lines are tooled, so no part of that is waiting on a new mold — though a USP wearing an adapter we have not seen before may need a conversation first.

Tell Us the Model and What Is Under the Dust Cover

On H&K those are two separate questions, and the second one changes the shell more than most people expect.

Shopping Cart